Mamod Engine Spares Parts: The Mamod Guru (2025)

See details

MAMOD 3 WASHERS 3/8ths INCH SE1 SE2 SE3

SET OF THREEBLACK HARD FIBRE WASHERS

FOR 3/8ths" THREAD DIA. SAFETY VALVE

See details

Mamod SA1 Roadster Decal

Mamod Roadster SA1 Decal

Affixed to the front of the Roadster

See details

MAMOD COPPER PIPE 1/8th inch O.D. X 12"

1/8th-inch diameter Copper Pipe

Suitable for all Mamod copper pipe-work

See details

MAMOD FORKS SPRING - TE1/TE1A/SW1

Steering Spring

This is the tension spring fitted on bottom (TE1A/ SW1) and top (SR1A) of the steering forks.

See details

MAMOD SIGHT GLASS GASKET

Genuine Mamod Sight Glass Gasket

Part of the whole assembly that ensures no water leaks from the boiler.

See details

MAMOD SAFETY VALVE 'O ' RINGS (top of safety valve only) (FIVE)

Five Mamod Steam Engine 'O' Rings

This type of 0 ring fits on the top of Mamod Safety Valves.

Both 1/4" and 3/8" valve thread sizes.

See details

MAMOD SR1A CANOPY DECALS

Genuine Mamod Decals for the Steam Roller

Make your Canopy great again!

See details

MAMOD STEAM WAGON DECALS /STICKERS

Genuine Mamod Decals for the Steam Wagon

Make your Steam Wagon great again!

See details

MAMOD WASHERS/ SEALS/ AND 'O' RING

Washers For Mamod Engines

Traction Engine/ Steam Roller/Steam Wagon/ Stationary types

See details

MAMOD FORKS COPPER LEAF SPRING FOR TE1A/SW1

Mamod Copper Steering Forks Spring

An absolute necessaity to keep your mobile engine going in a a straight line.

See details

MAMOD SIGHT GLASS (PERSPEX)

Sight Glass Gasket for Mamod engines

Perspex "glass" window suitable for boiling point temperature.

See details

MAMOD BOILER REPAIR INSERT 1/4"

Repair Insert all Mamod Boilers

See details

MAMOD BOILER REPAIR INSERT 3/16"

Boiler Repair Insert for all Mamod boilers 3/16" - Water Level Plug

For replacing your existing damaged boiler thread.

See details

MAMOD CANOPY TE1A/SR1A BRASS SCREW

Genuine Mamod Brass screw the Canopy

For Traction Engine and Steam Roller

Hand tightened screw.

See details

OIL FOR MAMOD STEAM ENGINE

Superb Steam Oil for any Mamod Engine

Great little dropper bottle with the right oil.

Perfect to keep your engine running.

See details

FOR MAMOD CYLINDER TRUNNION SCREW/ SPRING/ WASHER

Cylinder Bolt Spring Washer for Mamod Engines

Just screw this set through the Forward/Reverse Lever, through the Engine Face Mounting Bracket,
and finally, into the Cylinder face.

See details

MAMOD BOILER REPAIR INSERT 3/8"

Mamod Boiler Repair Insert 3/8"

Suitable for an old type Mamod Stationary Engine where the boiler has the larger Safety Valve with a 3/8th inch thread dia.

See details

MAMOD STEERING ROD ADAPTER - old rod to fit the new forks

Convert Mamod Steering Rod to fit current Steering Forks

For Steering Forks made after 2020.

Brass Steering Rod Fitting for a rod conversion allowing an old rod to fit the new type Mamod Steering Forks.

See details

MAMOD STEERING ROD ADAPTER - old rod to fit the old forks

Mamod Steering Rod Fitting and Nut

Brass Fitting for your pre 2020 Steering Rod.

See details

MAMOD BOILERBLANKING PLUG

Mamod Engine plug

For your Mamod engine renovation project.

You can use this to blank off a spare thread such a whistle thread on many engines.

1/4" BSF thread

See details

Mamod Traction Engine and Steam Wagon Forks Spring and Nut

Front suspension spring and nut to fit the Mamod TE1 and TE1a

See details

MAMOD STEAM ENGINE SOLDERING KIT

Soldering Set for your Mamod repair or full renovation

Multicore solder (60% tin,40% lead)

The perfect solution to finish with a wonderful soldered joint to be proud of.

See details

GET YOUR MAMOD ENGINE RUNNING

It's the UltimateRenovation and Repairs Guide!

Find out how to get your engine running properly.

See details

MAMOD STEERING STEAM ROLLER KNURLED NUT/SPRING/WASHER

Mamod Steam Roller Forks Steering Damper

The nut is round and has a knurled grippable surface. NOT FOR TRACTION ENGINE

See details

MAMOD SIGHT GLASS REPAIR KIT

Mamod Repair Sight Glass Kit

Repair/ renovate your Water Level Sight Glass.

See details

Fill the Mamod Boiler and Suck Out Excess

No messing with this little gem.

See details

MAMOD WATER LEVEL PLUG SE2 and SE3

Retro water level plug...... 3/16" bsw thread.

• For the older model Mamod SE2 and SE3 engines using the 3/16" bsw* threaded plug.

*Please make sure you don't need the 3/16th BSF thread!

See details

STANDARD WATER LEVEL PLUG FOR TE1A SR1A

For all Mamod Engines 3/16" bsf

Standard Water Level Plug for any Mamod Boiler where one is fitted (except SE2 and SE3).

See details

MAMOD FOOT PUMP ADAPTER - Water Level Plug

Mamod Engine "Run it on Air" Adapter - Water Level

• Foot Pump Adapter
• Run your Mamod engine on compressed air.
• Water Level Plug

See details

FOOT PUMP ADAPTER - Whistle

Mamod Engine "Run it on Air" Adapter - Whistle

Another great bit of innovation from a specialist supplier who has come up with a wizzo idea for testing and trial running your engine. For the whistle position.

See details

MAMOD BLACK LARGE HUB CAPS x 2

Large Black Hub Caps Mamod Mobiles

Suitable for the larger dia rear axles.

Traction Engines/ Steam Roller/Steam Wagon/

See details

MAMOD BLACK SMALL HUB CAPS x 2

Small Black Hub Caps Mamod Mobiles

Suitable for the smaller dia axles.

Front axle: Traction Engines/ Steam Roller/Steam Wagon/Roadster

Rear axle:Steam Wagon/ Roadster and variations

See details

MAMOD CHROME LARGE HUB CAPS x 2

Large Chrome Hub Caps Mamod Mobiles

Suitable for the larger dia rear axles. Traction Engines/ Steam Roller/Steam Wagon/

See details

MAMOD CHROME SMALL HUB CAPS x 2

Small Chrome Hub Caps Mamod Mobiles

Suitable for the smaller dia axles.

Front axle: Traction Engines/ Steam Roller/Steam Wagon/Roadster

Rear axle: Roadster and variations

See details

MAMOD KIT BOILER - UNION NUT

Brass Union Knurled Nut & 0 Ring

You will need thisjoining-knurled-nutthat secures the steam pipeto the boiler
if you have a Kit Type boiler that requires no soldering.

See details

MAMOD BURNER TRAY SHIELD -SP2 / SP3/ SP4

Mamod Burner Tray Shield

For all Mamod engines with Burner Trays that use a Shield:

This fits all solid fuel Burner Trays but not all engines require one.

See details

GENUINE MAMOD PISTON TE1A TR1A SW1

Standard Mamod Piston

Fits all mobile engines ever built.

ForTE1A/ SR1A/ SA1/ SW1/ SP2 /SP3/ MM2

See details

MAMOD (SA1) ROADSTER BACK AXLE

See details

MAMOD TE1/TE1A/SW1 BRASS CHIMNEY COWL

Mamod Brass Chimney Cowl

Chimney and Smoke Box not included.

See details

FOR MAMOD - SAFETY VALVE 3/8ths inch

Retro Safety Valve 3/8" dia thread

Suitable for SE1 SE2 and SE3 engines.

See details

SAFETY VALVE (STANDARD) 1/4" BSF

Mamod (Standard) Safety Valve

This safety valve is compatible with most of the Mamod steam engines

It does not fit the SE1 SE2 or SE3 models.

See details

MAMOD AXLE SPACER FOR SA1 ROADSTER

Mamod Steam Roadster Rear Axle Brass Spacer

Rear Axle requires a spacer on one side

See details

MAMOD BRASS PULLEY ROADSTER

Mamod RoadsterBrass Pulley

This is one of the reduction gearing pulleys used on the steam car.

The pulley fits onto the middle axle.

See details

MAMOD SIGHT GLASS BRASS SURROUND

Mamod Sight GlassBrass Surround

Brand new from Mamod Ltd.

For your Mamod engine repair project.

This is needed if yourold brass surround is damaged.

See details

MAMOD SP2 /SP4 ENGINE FIREBOX SIDE PLATES

SP2 /SP4 Stationary Engine Firebox Side Plates

Our photo was taken with the protectivefilm stillaffixed.

See details

MAMOD SP4 FORWARD/ REVERSE LEVER

Mamod SP4 Forward/Reverse Lever

This is fitted to the SP4 engines currenty in production.

You will need the Trunnion Screw and Washer to complete the job

See details

MAMOD STEERING RACK KING PINS FOR SA1

King Pins for Mamod Steering Rack

Useful if the King Pins have gone missing

See details

MAMOD CANOPY BRACKET/FIREBOX CLIP TE1

For Old Mamod TE1 Canopy Support Clip

TRACTION ENGINE ONLY:
If you don't know what this is for don't worry about it! But if this is just what you are looking for then you have found ..........

See details

FOR MAMOD CRANKSHAFT SE1 SE2 SE2A

Dimension: For Mamod Crank Shaft Length 47mm.

The shaft diameter is suitable for SE1 SE2 SE2A Stationary engines only.

Not for and mobile engines.

See details

MAMOD COPPER PIPE SET TE1A SR1A SW1

Mamod supplied Copper Pipe Set

•These are the 3 pipes which are soldered to the Mamod Traction Engine engine frame